Search results

  1. BHoward6.6

    LB7: cant get cp3 pump off

    Remove the fuel injection pump bolts. IMPORTANT: Be careful not to damage any mating surfaces. Remove the fuel injection pump from the block. Use 2 screwdrivers to work the pump from the block towards the rear of engine keeping the pump straight. The fuel injection pump may need to be...
  2. BHoward6.6

    Coolant leak

    X2. Get a mirror and a flash light.
  3. BHoward6.6

    FPRV....to shim or not to shim

    Search "Bottle test" ~ http://www.duramaxdiesels.com/forum/showthread.php?t=1995&highlight=Bottle+test ~ This will tell you if you need to shim your FPRV. Search "Race Valve", This will tell you to not install a Rave Valve unless it's a race truck. If some guys get low rail pressure...
  4. BHoward6.6

    Ideas please! traction setup for drag racing but still tow heavy?

    I have the new style with the hard rubber bushing that presses on top of the leaf spring. I adjust them by tighting 1/4 turn past the rubber bushing touching the leaf spring.
  5. BHoward6.6

    Ideas please! traction setup for drag racing but still tow heavy?

    They are silent. They don't seem to affect the ride loaded or empty.
  6. BHoward6.6

    Ideas please! traction setup for drag racing but still tow heavy?

    I have had anti axle wrap bars, they were not good with pulling the 5th wheel, they made it ride very rough. With the Cal-Tracs the ride is fine. The Cal-Tracs do not seem to effect the ride at all.
  7. BHoward6.6

    Are all stock G-80 diffs the same?

    That was a accident, I was just driving along, minding my own business......... ok, ok, I just did a couple burn outs, but they weren't that long, about half throttle. Making sure my G-80 worked before I swapped it for the tru-trac.
  8. BHoward6.6

    WTB TCM for my 05

    This is exactly what I did. I use one TCM for DD and T/H for towing my 5th wheel. I install a second TCM for the track. This method works great for me, I purchased my second TCM from a junk yard.
  9. BHoward6.6

    Allison 6sp: Trans Tunning

    My street tires are 33's, my new track only slicks are 28's. Is there anything I should change in my TCM tune when I'm at the track with the 28" tires? I don't know if changing the Speedo Parameters, {HO136} Tire RPM's would help or not. I have 2 TCM's, one for the street and one for the...
  10. BHoward6.6

    Happy Birthday LBZrcks!!

    Happy Birthday Jason :ballons:
  11. BHoward6.6

    Mobil 1 5W-40 for $12.99 a gallon

    2 stores did the same to me, I told them to ring it up and bam, the lower price came up.
  12. BHoward6.6

    Mobil 1 5W-40 for $12.99 a gallon

    Nice, I got 16 gallons:D
  13. BHoward6.6

    Question: Compound turbo pressure ratios?

    I do have the GT4094VA map, but when I e-mailed Bullseye Power about a map this is the reply~ "We did not create any MAPS we use engine dyno, wheel dyno and gas stand test equipment for results. Regards, Bill Devine Sales/Marketing Manager Bullseye Power LLC"
  14. BHoward6.6

    Question: Compound turbo pressure ratios?

    Thanks Blake. I know how to calculate turbo pressure ratio's, I'm trying to find out if there is a ideal relationship between the two turbos and if so what it would be.
  15. BHoward6.6

    Question: Compound turbo pressure ratios?

    Ok, that makes sense. So would there be a ideal % lower for the secondary than the primary? With a primary P/R of 2.7 and the secondary P/R 1.6, that's about 41% lower. If the P/R were closer would that even out the work between them? This stuff is all black magic and voodoo to me.
  16. BHoward6.6

    Question: Compound turbo pressure ratios?

    What is the ideal compound turbo pressure ratios? Lets say I have a 483 and a 4094avnt with a total boost of 50psi, and 25psi from the 483. At sea level that gives a overall P/R of 4.4, Primary P/R of 2.7 Secondary P/R of 1.6 For daily driving, towing and racing, is there a perfect P/R...
  17. BHoward6.6

    Vote for me!! DPC 2014

    :truestory: