Search results

Search the forum Search Articles
  1. LBZ

    3" lift RC Control Arms on 6" lift?

    Actually it will fit but you have to crank the bars up quite a bit and as said alignment is a bitch. Buddy left his in with his cognito 7-9” and it worked but angles on the top BJ still weren’t the best. Rode fine though and aligned fine. If you have a level kit in it now you may want to put the...
  2. LBZ

    Good Shop in Oakland California area?

    Turns out that buddies truck that was knocking when he was down in Cali it was actually #7 injector that failed. 2 different scanners said it was #8. Really thinking I should invest in a Tech 2. Clearly the aftermarket ones can’t be trusted.
  3. LBZ

    First DSP5 Switch

    Not that I recall.
  4. LBZ

    GM should have stuck with Allison

    I’ve actually never even ridden in an L5P long enough to even know if the trans they currently run is decent or not, but I do know gm needs to do something with that shitty 6 speed they put behind the 6.6 gas. Worst driving truck I’ve ever owned.
  5. LBZ

    First DSP5 Switch

    As my buddy and I trade swear words at this LBZ we’re trying to start after doing head gaskets we were trying to remember who made the first dsp5 switch available to market. I feel like it was Kennedy or SoCal but can’t rightly remember. Any of the other OG’s on here recall the answer to this...
  6. LBZ

    LMM wheel bearing on a classic

    Swapped out the lmm sensors for the old lb7 ones I kept from my truck and good to go. No more codes!
  7. LBZ

    LMM wheel bearing on a classic

    Good to know. I figured the sensors were interchangeable physically, just didn’t know if they were different in themselves. I’ll try it on Friday when I’m done work. It’s weird cuz I did plug in the old hub and it didn’t change but I’ll give it another whirl.
  8. LBZ

    01-10 steering box redhead ,PSC ,OEM

    Glad that one I found worked out. Will be the next one I put in. Need to do my pump first though. It’s pretty weak.
  9. LBZ

    Who machines C3 apply plates these days?

    It does. I have one of his trans in my truck with that setup. Shifts great drives great.
  10. LBZ

    LMM wheel bearing on a classic

    Thanks, but I have an ‘03. No stabilitrak or anything so troubleshooting is a bit different. I have alldata access, just didn’t yesterday where I was so just wanted to know if anyone knew if the hubs were different between classics and LMM’s. Pretty sure the problem is on the truck side not the...
  11. LBZ

    LMM wheel bearing on a classic

    Will an LMM wheel bearing work on a classic truck like my ‘03 as far as the abs sensor goes? I know the hub will fit, but will the sensor work? Just put some ac delco hubs in my ‘03 that the 20980075 p/n says are for a bunch of different vehicles including LMM’s but I have an abs code now for...
  12. LBZ

    05 transmission in 02 truck?

    Yes. But the OP wants to go the other way. ‘05 trans into an ‘02. He shouldn’t see any codes.
  13. LBZ

    05 transmission in 02 truck?

    I thought you would only get a code if you added the wire for it that the 7’s didn’t have? It was my understanding that if you used your normal external harness it didn’t even know it was there and no code would come active.
  14. LBZ

    01-10 steering box redhead ,PSC ,OEM

    Difference being?
  15. LBZ

    Good Shop in Oakland California area?

    300 is low I agree. And I only checked one hole. But I’ve seen trucks running fine lower than that. Just down on power and were hazy. But not noisey. That said I only checked the one hole on this truck so it may other issues being it has over 350 miles on it.
  16. LBZ

    How much should I trust FASS filtration?

    I’d risk it if it was filtered good and going into a 12v Cummins. In a common rail? Not a chance though.
  17. LBZ

    05 transmission in 02 truck?

    Cooler line fittings are different size/thread. You will need to swap bellhousings or get different cooler lines. The hose kits for replacing the cooler hard lines with hose often have fittings for both the ‘01-‘02 and ‘03-‘05 in them. Other than that no difference other than the ’05 has ( I...
  18. LBZ

    01-10 steering box redhead ,PSC ,OEM

    As long as the line ends are the same that’s the important part.
  19. LBZ

    Good Scan tool recommendations

    Don’t recall. It starts with a 2 and is the Bluetooth model.
  20. LBZ

    Good Shop in Oakland California area?

    An Autel and a snap on. Not sure of models. I remember some talk about this years ago but I don’t recall if anything concrete was found. I haven’t seen or encountered this issue myself. Oh and a correction buddies truck is an lly not a Z. Sounds like he’s getting it hauled to the border and he...
Top Bottom