Search results

Search the forum Search Articles
  1. rfletes79

    4l80e capability

    I've been talking to Rossler about building one for the Chevelle, he says a 400 will be stronger, but I need the overdrive so we are going to "try" it and see what happens. He says I can shift into od under full power, which is something most builders can't do. He mods them with some special...
  2. rfletes79

    Midwest Drags

    So, will you fit the Street Diesel class now with white lightning??
  3. rfletes79

    Midwest Drags

    Right on!! This is going to be a great trip, been wanting to do one of these for the last 10 years (or so) since drag week came out. There always seems to be something in the way and probably couldn't get in anyways since its so popular.
  4. rfletes79

    Cam drive gear on crank pin sheared

    Crap, I didn't see the other photo which has the hub off, my bad. Pull the crank.
  5. rfletes79

    Cam drive gear on crank pin sheared

    The pic shows the reluctor wheel hub and oil pump gear misaligned with the crank. That pin broke for sure. Once you remove that hub then you can see the cam gear and pin. It might be fine, and your issue is just the hub in front of it. You should be able to pull that off with a puller. Just...
  6. rfletes79

    Midwest Drags

    Here’s the link to the event: https://summitmidwestdrags.com/ I’ve registered for street diesel but also fit super street 315, I’ve already asked if I can run multiple classes, which they’ve said I can. Once I get the details I’ll decide which route to go. At the very least I’ll stick with...
  7. rfletes79

    Midwest Drags

    Summit racing is putting on a 3 day race where we drive to 3 different drag strips and race in a drag week type format. The info was release today on waglers fb page, not sure if you guys seen it yet but hoping on making the trip in june with the Chevelle. Sounds like fun!! Classes and...
  8. rfletes79

    Clam shell gaskets???

    Shouldn’t be that hard to find. Pull the y bridge and inspect it.
  9. rfletes79

    Delete with emissions EFI tune

    I would ask ATP....
  10. rfletes79

    LB7: Cheapest way to obtain EFI Live

    Oh and a cts2 can control dsp tuning for your LB7 and an LLY. Also, your autocal can control the dsp tuning as well. So you do not need a dsp switch in your application.
  11. rfletes79

    LB7: Cheapest way to obtain EFI Live

    Autocals only work with a flashscan that is linked to it. You cannot just load any tune to an autocal. You can purchase a used autocal and have it linked to anyone with a fs that can send you tunes. And as far as vin space availability. All autocals can have up to 220 vin spots, the fs that is...
  12. rfletes79

    Chevelle upgrades.

    Another weekend of testing, made the trip to Famoso yesterday. Track was on point, it took everything we threw at it. Got faster every pass, just ran out of time. Made some fueling, maf, batteries and bump adjustments during the week that all seemed to work out. Pretty sure this wraps up our...
  13. rfletes79

    Chevelle upgrades.

    https://youtu.be/FzrJqEGEfoo hopefully this works...….. one of our passes from this past weekend.
  14. rfletes79

    Chevelle upgrades.

    I don’t know, I don’t keep track of that. And the combo has evolved so many times in the last decade, it would be next to impossible to account for everything..... It wouldn’t be that difficult to figure out what it would cost to build it. We all know what these motor cost to build (it’s in my...
  15. rfletes79

    Manifolds with stock up-pipes?

    I have a set of max flows that work with stock up pipes. As far as I know these are the only ones that do this.
  16. rfletes79

    Chevelle upgrades.

    So last year when I made new fuel return lines I just laid the fuel temp plug and sensor on the intake (clamshell) and just zip tied it to the harness, it just picked up whatever temp it could while just laying there, worked fine no issues. With this new combo I was very curious as to what...
  17. rfletes79

    Chevelle upgrades.

    First trip out to the track with the new setup. Had some issues with a pretty good size exhaust leak, pretty sure I narrowed it down to the up pipes/pedestal but fought it all day and smoked the lights 4 out of 5 runs...….. sucked, I haven't done that in years. The one pass I got in without...
  18. rfletes79

    Chevelle upgrades.

    Thx you guys. Someday I might actually have a ‘built’motor for her. But for now we just keep on flogging the stock shit. Lol. This intake is something else, not sure who on here has one on an LB7 but holy crap. It’s quite the task to make it work. I thought it was pretty straight forward...
  19. rfletes79

    Chevelle upgrades.

    Sent from my iPhone using Tapatalk
  20. rfletes79

    Chevelle upgrades.

    All done, up and running again. Hopefully testing this weekend here locally. New intercooler and turbo set up work extremely well. So far the intake temps are well in check. Pretty amazing how it all works together. I’ll know this weekend for sure how efficient it all ended up. But so far so...
Top Bottom