Search results

Search the forum Search Articles
  1. DAVe3283

    LBZ os12606128 to be used on os12632483 truck

    You might be able to compare across OSes with EFILive V8. I know they added that recently, at least for the gas ECUs. Sent from my FlashScan V2 using Tapatalk
  2. DAVe3283

    Truck Dies Seconds After Starting

    The starting than immediately shutting off does sound like a security issue, which could easily be caused by a loss of communications between the ECU and body modules. Since that started after handling the wiring near the fuse block, I would dig into that section again.
  3. DAVe3283

    LMM going back to idle when travelling

    Depending on how the tune was done, it could be a silent code. Often with deletes, the tuner will turn off tons of codes, including some they don't strictly need. Since it sounds pretty repeatable, I'd grab a factory scan tool or equivalent, and when it happens, read out all 3 accelerator pedal...
  4. DAVe3283

    What are you paying for Diesel in your area?

    Down a bit here, paid $5.63 on the way to the farm today. Still have to run the credit card twice to fill up the Suburban, but at least the price is not higher than last time for a change.
  5. DAVe3283

    Vehicle fuel/maintenance log software?

    You can run something like Nextcloud so you have all the files yourself, but that requires a bit of technical know-how. If you don't need two-way sync, but will do all your editing on the phone, you can use a tool like SMBSync2 to back up the file to your computer every night when you are on...
  6. DAVe3283

    Hello

    I think the EPA is responsible for that one in a lot of ways. Sent from my FlashScan V2 using Tapatalk
  7. DAVe3283

    Steering Box for Quadrasteer Suburban

    Correct, the rear steer is based on the steering wheel angle sensor, so I would lose some rear steering angle. I guess I can hook up my Tech2 and see how much front steer angle I need to max out the rear steer (12° IIRC). If it maxes out before full lock, then I might not lose any meaningful...
  8. DAVe3283

    Steering Box for Quadrasteer Suburban

    I have a 2003 Suburban 2500 Quadrasteer (w/a LB7) and the steering box input shaft seal started leaking. The box still feels tight, just leaky. I believe the part number is 19330624, and it appears that box is unique to the Suburban 2500 platform (including Yukon XL 2500, H2, and Avalance)...
  9. DAVe3283

    EFILIVE June 2019 public release downloads?

    I hadn't heard of that one. I know they made the LS1A controller free for everyone. What version was that? Sent from my FlashScan V2 using Tapatalk
  10. DAVe3283

    Quiet today

    I had to start going back into the office for the first time in 2+ years. Amazing how much less work gets done in the same time when people keep coming over to talk instead of letting me work. If I was hourly, I wouldn't care, but I'm salaried so I have the same amount of work to do, and less...
  11. DAVe3283

    EFILIVE June 2019 public release downloads?

    There are some things that got removed from newer versions, especially around emissions. In theory there are ways to work around that, but sometimes it's easier to just not update than try and find a workaround. At least that is my reason for stockpiling all the old versions [emoji28] Sent...
  12. DAVe3283

    EFILIVE June 2019 public release downloads?

    I'm in the office today, so I won't be able to upload until this evening. Hopefully dndj can beat me to it so you can turn the limits back down. Sent from my FlashScan V2 using Tapatalk
  13. DAVe3283

    EFILIVE June 2019 public release downloads?

    I see the same thing, 8.2.24 uploads, but the larger 7.5.28 sits at 0%. Will try again when you have the new addon ready.
  14. DAVe3283

    EFILIVE June 2019 public release downloads?

    I have both of the versions you are looking for, and I can upload them here once James ups the limits. EFILiveV7.5.28_Update01_Setup.exe = 112 MB (109 MB as a 7zip file) EFILiveV8.2.24_Setup.exe = 90 MB (88 MB as a 7z file)
  15. DAVe3283

    5 speed to 6 speed conversion.

    I'm not a trans expert at all, but I was told the newer valve bodies like the LML body used in the DT kit don't need as much work as the older ones to hold power. That all said, I don't know for sure that my trans builder didn't modify the DT valve body, but they didn't mention doing anything...
  16. DAVe3283

    5 speed to 6 speed conversion.

    What all is done to the trans? If you have good clutches, I'd expect it to hold those mods just fine. My motor setup is similar (S371, SAC75, 12mm) and it holds, but I'm not on a max effort tune. The bigger issue you might run into is their trans tuning might not work super well with your...
  17. DAVe3283

    5 speed to 6 speed conversion.

    I have a Duramax Tuner kit, running my own tuning-- had problems like Mike mentioned with theirs they never did resolve. Once I got the tuning dialed in, having a 6th is nice, and it's holding a bit of power (my truck dynoed 660hp/1000lb-ft at the tires on the daily tune), but I have a built...
  18. DAVe3283

    Funny Characters on my dci. Need some help.

    Well that's a new one to me. The cluster itself is almost certainly faulty, but in a way I've not seen before. Like a bad connection between the CPU and the VFD driver chip somehow. You could open the cluster up and look for corrosion, but the simplest solution is probably to get a rebuilt...
  19. DAVe3283

    lbz keyless entry

    Typically yes, you just need to pull the radio fuse. Sorry, should've mentioned that. If you need to flash your truck again, try just pulling the radio fuse (it's in the under hood fuse box) and I bet it works. Sent from my FlashScan V2 using Tapatalk
  20. DAVe3283

    lbz keyless entry

    Glad you got it all going! My Suburban has an aftermarket radio module, and I have to pull the dang radio fuse to flash anything successfully. Sent from my FlashScan V2 using Tapatalk
Top Bottom