Search results
-
New Built 6spd shifts hard then "relaxes"
08' LMM My buddies truck. Just put a new rebuilt Built tranny in the truck with a new billet converter had the tranny done locally couldn't tell you any specs other than It now has a transGo shift kit in it also. The truck has an H and S minimaxx on it also. After doing the tranny relearn, the...- Wildman
- Thread
- Replies: 2
- Forum: Mike L's Trans Talk
-
Built motor, injectors won't stay sealed?
Thats prob correct its been a while since this happened. I think i went an extra 5 ft lbs to make sure the seated I believe its a 17mm nut on the nozzle. One of the local marine diesel shops my buddy works at was actually the one who brought the idea of the nozzles leaking to my attention I... -
Built motor, injectors won't stay sealed?
Well they have cups they're just part of the cylinder head as once piece in contrary to the LB7 which are removeable. Regardless it can leak past the nozzle and into hole the injector sits in once that hole fills it will eventually leak past the cheasy oring and run down the cylinder head. Just... -
Built motor, injectors won't stay sealed?
You are not lifting and/or not seating the injector. It is 22 ft lbs on the hold down bolts btw iirc. I had this same issue when I took my injectors out to clean the nozzles. I chased this for a month without answers from anyone before I figured out my issue. I had fuel seaping out the injector...