Search results
-
Stock tuned truck large surge after fpr install
Ok guys sorry about the late reply however finally got the truck up and running due to my lack of time and panic I ended up taking it to the stealer which was not a good idea. Spoke to the service rep who know me and leaving the truck in which I thought was there capable hands they diagnosed it... -
Stock tuned truck large surge after fpr install
Brought it from xpd diesel figure it would be quality -
Stock tuned truck large surge after fpr install
Alright so I can just shim a stock one that maybe still bad ? -
Stock tuned truck large surge after fpr install
Hey guys about a two week ago I replaced the water pump and the fpr becuase I would get a tiny surge every now and then, after replacement ran great for a week and the surge has come back in a very large way, rail pressure gauge reads spikes of 15,000 and it's now a consistent surge. Was able to... -
Intercooler bushings
Hey guys need some intercooler bushings, went to Gm and they told me it's a non replacement item and the intercooler would need to be ordered as well, need theses bushings bad mine are cooked any one have any ideas ? Anyone ever replace them thanks. -
Duramax head gasket
What exactly happend how wad it your fault ?- shark1
- Post #18
- Forum: Duramax Hard Parts
-
Duramax head gasket
Hey guys it seems like I am hearing about a few storys in reguards to head gaskets so it's got me a little worried. I've got an 05 lly with about 120,000 kms and is pretty much stock still running a stock tune now as of right now it's still a daily drive and I'm wondering is there anyway to...- shark1
- Post #16
- Forum: Duramax Hard Parts
-
Fuel pressure regulator/Surginf idle
Im pretty sure you can order the regulator off GMpartsdirect or you check this link out http://www.merchant-automotive.com/llyfuelpressureregulator.aspx Not sure how bad the idle is but have you tried running some fuel additive first ? Merchant is very good and trusted site. Hope this helps- shark1
- Post #9
- Forum: Duramax Hard Parts
-
Help: lbz cracked piston?
Hey guys after reading the entire thread, it's becoming more and more clear to me you gotta pay to play and that being said, it seems that you guys are rebuilding but then replaceing with OEM pistons my question is why? Also I was always under the impression that the duramaxs had a pretty stout...- shark1
- Post #42
- Forum: Duramax Hard Parts
-
LLY: Hicup and stumble at idle
PW ? Could you explain please, currently have a stock truck except for an EGR block -
LLY: Hicup and stumble at idle
Hey guys seem to be running into a little issue when i come to a stop light foot on the brake I seem to get a bit of a stumble at idle, I can feel it in the truck kinda like a light misfire, right now no codes present dosen't seem to be down on power and no smoke any ideas? thanks for the help . -
Need help front end or somthing poping or thud like sound.
Im haveing a simular problem i get a "POPING" sound when im on the brakes and coming to a stop, and when i leave and squeze the throttle a bit agresivly it pops multiple times. Dose this sound like a ball joint ?- shark1
- Post #8
- Forum: Chassis, Suspension & Brakes
-
Cold weather smoke
Ya i had i cold morning some time last week and was getting a very light blueish white haze comeing out of the exhuast soon as the high idle went away so did the smoke. I would assume this is also normal correct?- shark1
- Post #19
- Forum: Duramax Hard Parts
-
Question: Engine problem
Hey guys long time reader first time poster, got a couple of questions in regaurds to this incident. First off what would cause a piston to crack ? espeacally like Kennys did? How can you avoid a senario such as this ? and i watch the video and all that was really going on was alot of excesive...- shark1
- Post #43
- Forum: Duramax Hard Parts
-